Coatomer complex I is required for the transport of SARS-CoV-2 progeny virions from the endoplasmic reticulum-Golgi intermediate compartment (preprint)

SARS-CoV-2 undergoes budding within the lumen of the endoplasmic reticulum-Golgi intermediate compartment (ERGIC) and delivers progeny virions to the cell surface by employing vesicular transport. However, the molecular mechanisms remain poorly understood. Using three-dimensional electron microscopic analysis, such as array tomography and electron tomography, we found that virion-transporting vesicles possessed a coated protein on their membrane and demonstrated that the coated protein was coatomer complex I (COPI). During the later stages of SARS-CoV-2 infection, we observed a notable alteration in the distribution of COPI and ERGIC throughout the cytoplasm. Depletion of COPB2, a key component of COPI, led to the confinement of SARS-CoV-2 structural proteins in the perinuclear region, where progeny virions were accumulated within the ERGIC. While the expression levels of viral proteins within cells were comparable, this depletion significantly reduced the efficiency of virion release, leading to the significant inhibition of viral replication. Hence, our findings suggest COPI as a critical player in facilitating the transport of SARS-CoV-2 progeny virions from the ERGIC. Thus, COPI could be a promising target for the development of antivirals against SARS-CoV-2.

Isogenic iPSC-derived proximal and distal lung-on-chip models: Tissue- and virus-specific immune responses in human lungs (preprint)

Micro-physiological systems (MPS) are set to play a vital role in preclinical studies, particularly in the context of future viral pandemics. Nonetheless, the development of MPS is often impeded by the scarcity of reliable cell sources, especially when seeking various organs or tissues from a single patient for comparative analysis of the host immune response. Herein, we developed human airway-on-chip and alveolus-on-chip models using induced pluripotent stem cell (iPSC)-derived isogenic lung progenitor cells. Both models demonstrated the replication of two different respiratory viruses, namely SARS-CoV-2 and Influenza, as well as related cellular damage and innate immune responses-on-chip. Our findings reveal distinct immune responses to SARS-CoV-2 in the proximal and distal lung-on-chip models. The airway chips exhibited a robust interferon (IFN)-dependent immune response, whereas the alveolus chips exhibited dysregulated IFN activation but a significantly upregulated chemokine pathway. In contrast, Influenza virus infection induced a more pronounced immune response and cellular damage in both chip models compared to SARS-CoV-2. Thus, iPSC-derived lung-on-chip models may aid in quickly gaining insights into viral pathology and screening potential drugs for future pandemics.

Switching of OAS1 splicing isoforms mitigates SARS-CoV-2 infection (preprint)

BackgroundThe rapidly accumulating disease susceptibility information collected from coronavirus disease (COVID-19) patient genomes must be urgently utilized to develop therapeutic interventions for SARS-CoV-2 infection. Chromosome 12q24.13, which encodes the 2-5-oligoadenylate synthetase (OAS) family of proteins that sense viral genomic RNAs and trigger an antiviral response, is identified as one of the genomic regions that contains SNPs associated with COVID-19 severity. A high-risk SNP identified at the splice acceptor site of OAS1 exon 6 is known to change the proportions of the various splicing isoforms and the activity of the enzyme. MethodsWe employed in-silico motif search and RNA pull-down assay to define a factor responsible for the OAS1 splicing. Next, we rationally selected a candidate for slicing modulator to modulate this splicing. ResultsWe found that inhibition of CDC-like kinase with a small chemical compound induces switching of OAS1 splice isoforms in human lung cells. In this condition, increased resistance to SARS-CoV-2 infection, enhanced RNA degradation, and transcriptional activation of interferon {beta}1, were also observed. ConclusionsThe results indicate the possibility of using chemical splicing modifiers aided by genome-based precision medicine to boost the innate immune response against SARS-CoV-2 infection.

Antiviral face mask functionalized with solidified hand soap: low-cost infection prevention clothing against enveloped viruses such as SARS-CoV-2 (preprint)

Infection prevention clothing is becoming an essential protective tool in the current pandemic, especially because now we know that SARS-CoV-2 can easily infect humans in poorly ventilated indoor spaces. However, commercial infection prevention clothing is made of fabrics that are not capable of inactivating the virus. Therefore, viral infections of symptomatic and asymptomatic individuals wearing protective clothing such as masks can occur through aerosol transmission or by contact with the contaminated surfaces of the masks, which are suspected as an increasing source of highly infectious biological waste. Herein, we report an easy fabrication method of a novel antiviral non-woven fabric containing polymer filaments that were coated with solidified hand soap. This extra protective fabric is capable of inactivating enveloped viruses such as SARS-CoV-2 and phi 6 in one minute of contact. In this study, this antiviral fabric was used to fabricate an antiviral face mask and did not show any cytotoxic effect in human keratinocyte HaCaT cells. Furthermore, this antiviral non-woven fabric could be used for the fabrication of other infection prevention clothing such as caps, scrubs, shirts, trousers, disposable gowns, overalls, hoods, aprons, and shoe covers. Therefore, this low-cost technology could provide a wide range of infection protective tools to combat COVID-19 and future pandemics in developed and underdeveloped countries.

Next generation infection prevention clothing: Non-woven Fabrics Coated with Cranberry Extracts Capable of Inactivating Enveloped Viruses such as SARS-CoV-2 and Multidrug-resistant Bacteria (preprint)

The Coronavirus Disease (COVID-19) pandemic is demanding rapid action of the authorities and scientific community in order to find new antimicrobial solutions that could inactivate the pathogen SARS-CoV-2 that causes this disease. Gram-positive bacteria contribute to severe pneumonia associated with COVID-19, and their resistance to antibiotics is increasing at an alarming rate. In this regard, non-woven fabrics are currently used for the fabrication of infection prevention clothing such as face masks, caps, scrubs, shirts, trousers, disposable gowns, overalls, hoods, aprons and shoe covers as protective tools against viral and bacterial infections. However, these non-woven fabrics are made of materials that do not possess antimicrobial activity. Thus, we have developed here non-woven fabrics with antimicrobial coatings of cranberry extracts capable of inactivating enveloped viruses such as SARS-CoV-2 and the phage phi 6, and two multidrug-resistant bacteria: the methicillin-resistant Staphylococcus aureus and Staphylococcus epidermidis. The non-toxicity of these advanced technology was ensured using a Caenorhabditis elegans in vivo model. These results open up a new prevention path using natural and biodegradable compounds for the fabrication of infection prevention clothing in the current COVID-19 and future pandemics.

Antimicrobial Face Shield: Next Generation of Facial Protective Equipment against SARS-CoV-2 and Multidrug-Resistant Bacteria (preprint)

Transparent materials used for facial protection equipment provide protection against microbial infections caused by viruses and bacteria, including multidrug-resistant strains. However, transparent materials used for this type of application are made of materials that do not possess antimicrobial activity. They just avoid direct contact between the person and the biological agent. Therefore, healthy people can get infected through contact of the contaminated material surfaces and this equipment constitute an increasing source of infectious biological waste. Furthermore, infected people can transmit microbial infections easily because the protective equipment do not inactivate the microbial load generated while breathing, sneezing, or coughing. In this regard, the goal of this work consisted of fabricating a transparent face shield with intrinsic antimicrobial activity that could provide extra-protection against infectious agents and reduce the generation of infectious waste. Thus, a single-use transparent antimicrobial face shield composed of polyethylene terephthalate and an antimicrobial coating of benzalkonium chloride has been developed for the next generation of facial protective equipment. The antimicrobial coating was analyzed by atomic force microscopy and field emission scanning electron microscopy with elemental analysis. This is the first facial transparent protective material capable of inactivating enveloped viruses such as SARS-CoV-2 in less than one minute of contact, and the methicillin-resistant Staphylococcus aureus and Staphylococcus epidermidis. Bacterial infections contribute to severe pneumonia associated with the SARS-CoV-2 infection, and their resistance to antibiotics is increasing. Our extra protective broad-spectrum antimicrobial composite material could also be applied for the fabrication of other facial protective tools such as such as goggles, helmets, plastic masks and space separation screens used for counters or vehicles. This low-cost technology would be very useful to combat the current COVID-19 pandemic and protect health care workers from multidrug-resistant infections in developed and underdeveloped countries.

Modeling SARS-CoV-2 infection and its individual differences with ACE2-expressing human iPS cells (preprint)

Genetic differences are a primary reason for differences in the susceptibility and severity of coronavirus disease 2019 (COVID-19). Because induced pluripotent stem (iPS) cells maintain the genetic information of the donor, they can be used to model individual differences in severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection in vitro. Notably, undifferentiated human iPS cells themselves cannot be infected bySARS-CoV-2. Using adenovirus vectors, here we found that human iPS cells expressing the SARS-CoV-2 receptor angiotensin-converting enzyme 2 (ACE2) (ACE2-iPS cells) can be infected with SARS-CoV-2. In infected ACE2-iPS cells, the expression of SARS-CoV-2 nucleocapsid protein, the budding of viral particles, the production of progeny virus, double membrane spherules, and double-membrane vesicles were confirmed. We also evaluated COVID-19 therapeutic drugs in ACE2-iPS cells and confirmed the strong antiviral effects of Remdesivir, EIDD-2801, and interferon-beta. In addition, we performed SARS-CoV-2 infection experiments on ACE2-iPS/ES cells from 8 individuals. Male iPS/ES cells were more capable of producing the virus as compared with female iPS/ES cells. These findings suggest that ACE2-iPS cells can not only reproduce individual differences in SARS-CoV-2 infection in vitro, but they are also a useful resource to clarify the causes of individual differences in COVID-19 due to genetic differences. Graphical Abstract O_FIG O_LINKSMALLFIG WIDTH=200 HEIGHT=200 SRC="FIGDIR/small/432218v1_ufig1.gif" ALT="Figure 1"> View larger version (112K): org.highwire.dtl.DTLVardef@165ec06org.highwire.dtl.DTLVardef@6a9d67org.highwire.dtl.DTLVardef@1840dd3org.highwire.dtl.DTLVardef@a7a4bb_HPS_FORMAT_FIGEXP M_FIG C_FIG

Protective face mask filter capable of inactivating SARS-CoV-2, and methicillin-resistant Staphylococcus aureus and Staphylococcus epidermidis (preprint)

Face masks have globally been accepted to be an effective protective tool to prevent bacterial and viral transmission, especially against indoor aerosol transmission. However, commercial face masks contain filters that are made of materials that are not capable of inactivating neither SARS-CoV-2 nor multidrug-resistant bacteria. Therefore, symptomatic and asymptomatic individuals can infect other people even if they wear them because some viable viral or bacterial loads can escape from the masks. Furthermore, viral or bacterial contact transmission can occur after touching the mask, which constitutes an increasing source of contaminated biological waste. Additionally, bacterial pathogens contribute to the SARS-CoV-2 mediated pneumonia disease complex and their resistance to antibiotics in pneumonia treatment is increasing at an alarming rate. In this regard, herein, we report the development of a novel protective non-woven face mask filter fabricated with a biofunctional coating of benzalkonium chloride that is capable of inactivating SARS-CoV-2 in one minute of contact, and the life-threatening methicillin-resistant Staphylococcus aureus and Staphylococcus epidermidis. Nonetheless, despite the results obtained, further studies are needed to ensure the safety and correct use of this technology for the mass production and commercialization of this broad-spectrum antimicrobial face mask filter. Our novel protective non-woven face mask filter would be useful for many health care workers and researchers working in this urgent and challenging field.